No results were found for the filter!
Bubinga Tamper 58mm - Motta This tamper from Motta has a high quality handle made of hard and robust bubinga wood. The wood grain is particularly beautiful and eye-catching. Thanks to the ergonomic handle, the tamper fits comfortably in...
(20.90€ / 1 pc.)
20.90€
3-5 Workdays Article No. 2467
"Nonstick" tamper with wooden handle - Metallurgica Motta Composed of a light wooden screw-on handle and a lower base with non-stick coating The lower part is made of coated stainless steel to prevent the coffee powder from sticking to...
(24.90€ / 1 pc.)
24.90€
3-5 Workdays Article No. 2971
Mimetic Tamper - Motta Wooden/stainless steel tamper, 58mm diameter To get the perfect cup of coffee from your filter holder, the ground coffee must first be properly pressed. Using the right tamper is the best way to achieve this. This...
(29.90€ / 1 pc.)
29.90€
3-5 Workdays Article No. 2238
Knock-box with removable striking bar - Metallurgica Motta Stainless steel, weight: approx. 750g This coffee grounds container (Knock-box) from Metallurgica Motta will fit in anywhere thanks to its simple, elegant design. Thanks to its...
(29.90€ / 1 pc.)
29.90€
3-5 Workdays Article No. 2239
Wooden tamper holder - Motta Holds up to 2 tamper/coffee cups of almost any size. This elegant, handcrafted Motta tamper holder gives your accessories a safe, dignified "home". In addition to the tampers, you can also place your filter...
(25.90€ / 1 pc.)
25.90€
3-5 Workdays Article No. 2237
Wooden tamper holder - Motta Holds up to three tamper/coffee cups of almost any size. This elegant Motta tamper holder gives your accessories a safe and dignified "home". In addition to the tamper, you can also place your filter holder...
(29.90€ / 1 pc.)
29.90€
3-5 Workdays Article No. 2236
Double aluminium funnel - MOTTA Two stackable funnels for the filter holder of your manual espresso machine. To keep your countertop clean and avoid spilling and wasting coffee grounds, Motta offers you a very practical accessory. The...
(29.90€ / 1 pc.)
29.90€
3-5 Workdays Article No. 2970
Wooden tamper holder - MOTTA A noble tamper needs a "home" to match. And that's what this striped tamper holder in light and dark wood is all about. With an internal diameter of 59 mm, it fits most tampers. Handmade in Italy Height: 31mm...
(19.90€ / 1 pc.)
19.90€
3-5 Workdays Article No. 2972
Stainless steel and striped tamper - Motta The tamper consists of a screw-on wooden handle with a beautiful striped pattern and a stainless steel bottom part. Perfect and ergonomic grip. This tamper is a real caress for the hand that you...
(24.90€ / 1 pc.)
24.90€
3-5 Workdays Article No. 2973
Black rubber pad holder - Motta Beautiful, non-slip black rubber pad holder. With an inner diameter of 59 mm, it fits most common tampers. Handcrafted in Italy Height: 20mm Outside diameter: 80mm Inside diameter: 59mm
(9.90€ / 1 pc.)
9.90€
3-5 Workdays Article No. 2974
Stainless steel tamper with wooden handle - Motta Consists of a screw-on handle and a lower part. The lower part is made of stainless steel and has concentric corrugations. These ensure a better tamping effect. The wooden handle is...
(23.90€ / 1 pc.)
23.90€
3-5 Workdays Article No. 2649
Stainless steel tamper with wooden handle - Motta Consists of a screw-on handle and a lower part. The lower part is made of stainless steel and has concentric corrugations. These ensure a better tamping effect. The wooden handle is...
(24.90€ / 1 pc.)
24.90€
3-5 Workdays Article No. 2650
MOTTA Milk Pitcher Model: Europa THE classic Made in Italy now in matte black Volume: 0,5 Liter Stainless steel: 18/10 The Motta milk jug is ideal for 2-3 cappuccini. Thanks to its large handle, the pitcher fits well in the hand and...
(24.50€ / 1 pc.)
24.50€
3-5 Workdays Article No. 2958
Aluminium Sfera Tamper - Motta Sturdy aluminium coffee tamper with a diameter of 57 mm. To obtain perfect coffee, it is essential to pack/press it correctly. Only when the ground coffee is pressed evenly can the hot water also pass...
(13.90€ / 1 pc.)
13.90€
3-5 Workdays Article No. 2645
Easy Tamper in aluminium - Motta Attractive, sturdy aluminium coffee tamper with a diameter of 57 mm. For perfect coffee, this step should not be underestimated. It's only by evenly distributing and pressing the ground coffee that the...
(13.50€ / 1 pc.)
13.50€
3-5 Workdays Article No. 2644
MOTTA milk jug Model: Europe THE classic made in Italy now in an unusual carbon design Volume: 0.5 Litre Stainless steel: 18/10 Fits perfectly in your hand. The sturdy design and comfortable handle ensure safety. This stainless steel...
(42.90€ / 1 pc.)
42.90€
3-5 Workdays Article No. 2633
6 Latte Macchiato spoons - Motta Length approx. 205 mm, 18/10 stainless steel. High-quality latte macchiatto spoons in a simple design. Long enough for a latte glass, they're a must-have for every macchiato lover. The noble, timeless...
(1.32€ / 1 pc.)
7.90€
3-5 Workdays Article No. 2639
6 cappuccino spoons - Motta 6 cappuccino spoons, approx. 125 mm long, in 18/10 stainless steel. High quality, simple and comfortable to hold - what more could you want from a good spoon? The high quality that distinguishes Motta is also...
(0.92€ / 1 pc.)
5.50€
3-5 Workdays Article No. 2638
Tamper look carbon 58mm - Motta Quality stainless steel Tamper from MOTTA with a well-shaped handle. The handle has been refined with an extravagant impression of water under a carbon design. It's a real eye-catcher in your kitchen....
(31.90€ / 1 pc.)
31.90€
3-5 Workdays Article No. 2634
Milk jug with lid - MOTTA There's nothing less attractive on a well-dressed coffee table than a tetrapack of milk or a bulky pot in which it has been warmed. To maintain its elegance, a milk jug from quality manufacturer Motta has been...
(9.90€ / 1 pc.)
9.90€
3-5 Workdays Article No. 2640
White milk jug - MOTTA Model: Europe. Volume : 0,5 Litre. Material : White stainless steel. Good grip. The high-quality, sturdy material and large handle ensure safe use. The inside of the jug is Teflon-coated and the outside shines in...
(25.90€ / 1 pc.)
25.90€
3-5 Workdays Article No. 2641
White milk jug - MOTTA Model: Europe. Volume : 0,75 L. Material : White stainless steel. For an extra cappuccino, you can use the larger version of the Motta milk jug. Thanks to the consistency of production and materials used, the 500...
(27.90€ / 1 pc.)
27.90€
3-5 Workdays Article No. 2642
Motta Tamper stainless steel Solid tamper from the quality manufacturer MOTTA made of solid stainless steel with black wooden handle. The bottom is flat and therefore ideal for all flat brewing heads with a diameter of 57mm. Due to its...
(21.40€ / 1 pc.)
21.40€
3-5 Workdays Article No. 2643
Grind distributor / Carbon design - Motta In addition to the Carbon Tamper, Motta now offers an accessory for perfectly distributing your ground coffee, which is as elegant as it is useful. It's almost indispensable for the pleasure of a...
(31.90€ / 1 pc.)
31.90€
3-5 Workdays Article No. 2635
Tamper Keychain Small aluminum key fob with the Motta logo on the bottom of the tamper. Weight 32g Height: 5 cm diameter: 2,8 cm The ideal souvenir for your friends who have a screen carrier machine.
5.90€
3-5 Workdays Article No. 2632
MOTTA funnel for coffee grounds Simple but very practical tool for dispensing coffee from the grinder directly into your filter holder. This funnel fits perfectly into a 58 mm sieve holder. It feeds the freshly ground coffee from your...
9.90€
3-5 Workdays Article No. 2630
Tamping Station Inox for portafilter by Motta Suitable for all portafilter types Stainless steel tamper station As practical and as beautiful in design as espresso accessories should always be. The tamping station is attached with the...
23.90€
3-5 Workdays Article No. 2624
Motta - 58 mm Tamper inox and wood handle Consisting of a screw-on handle and a bottom part. The bottom part is made of stainless steel. The wooden handle is designed to fit ergonomically in the hand. This tamper is therefore very...
19.90€
3-5 Workdays Article No. 2618
Motta - 58 mm Tamper wave Art. 8500/B Consisting of a handle and lower base that can be screwed together. The lower part is made of stainless steel and has concentric waves. These ensure a better and more even moistening of the coffee...
23.90€
3-5 Workdays Article No. 2620
Motta - 58 mm Tamper 9 Bar Art. 650 Consisting of a handle and lower part that can be screwed together. The lower part is made of stainless steel. The metal handle is designed to fit ergonomically in the hand. This makes this press very...
29.90€
3-5 Workdays Article No. 2621
Motta - 58,4 mm Tamper inox and wood handle Art. 8102/M Tamper made of polished stainless steel with wooden handle consisting of a screw-on handle and base The base is made of stainless steel. The wooden handle is designed to fit...
24.90€
3-5 Workdays Article No. 2619
MOTTA Measuring spoon Stainless steel To measure out coffee correctly. Rounded spoon = 14g of coffee.
5.90€
3-5 Workdays Article No. 2617
Tamping station for portafilters by Motta As practical and beautifully designed as espresso accessories should always be. High stability and easy cleaning distinguish this tamping station. Underneath the station, there is a non-slip...
23.90€
3-5 Workdays Article No. 2625
Motta - Coffee Leveling Tool 58mm Height from edge of the filter: 7 - 13mm, continuously adjustable The coffee distributor enables precise filling of a portafilter. With the help of the tool, an absolutely even surface and uniform...
34.90€
3-5 Workdays Article No. 2623
Europa 1L milk jug - Motta THE classic made in Italy Volume: 1 liter Shiny stainless steel Fantastic grip. The heavy design and large handle ensure stability.
32.90€
3-5 Workdays Article No. 2424
MOTTA Foaming Cup Europa THE classic made in Italy Volume 0,5 liters Rust-free stainless steel high gloss Fits perfectly into your hand. The weight and the generous handle offer security. This foaming cup is perfectly conceptualized in...
24.90€
3-5 Workdays Article No. 2440